Steel Bright Bar Manufacturer & Supplier

The bars are made from ingots and are processed after giving required reduction ratio and discarding hot top and bottom for homogeneity. They are either processed by hot rolling or hot forging. These bars are further heat treated by

• Annealing
• Normalizing
• Stress Relieving
• Quenching and Tempering
• Spheroidizing Annealing

Then the bars are bright by either

• Peeling and Reeling (for upto 120mm for rolled)
• Cold drawing (for upto 65mm)
• Proof machining (120-650mm)

They are also offered in

• Cut to length
• Multiple lengths

Quality Check of Bright Bars

Following checks are conducted in bars and reported in the TEST CERTIFICATE as per customer requirement

• Surface inspection (Magnetic Particle Inspection) is carried out of each bar end to end
• Positive Material Identification using XRF to certify in process chemistry of each bar
• 100% dimensional verification using calibrated verniers and Go No-Go gauges
• Step down testing
• Upset forging test
• NMIR (Non metallic inclusion rating)
• Macrostructure testing
• Microstructure phase analysis
• Grain Size
• Ultrasonic Testing for internal defects
• Radioactivity test
• Gas analysis (O, N, H)

 

 

 

Steel Bright Bar Manufacturer & Supplier 

Application and End-Use

We are manufacturing bars in various grades ,We manufacture the following popularly used grades:

EN19, EN24, EN25, EN26, EN30, EN31, EN36C, EN39, EN 40, EN41B, EN42, EN9, EN14A, EN15, EN16, EN18, EN47, EN100, EN351, EN353, EN354, EN355, C22E, C25E, C30, C35E, C45, CK45, C50, C55, C60, S45C, S235J2, S275J2, S355J2, ST52.3, C35E, C45R, 35B2, 28Mn6, 46Cr2, 34Cr4, 41Cr4, 20Mn5, 42CrMo4, 50CrMo4, 30CrNiMo8, 34CrNiMo6, 36CrNiMo4, 36NiCrMo16, 51CrV4 27MnCrB5, 32CrB4, 25CrMo4, 20MnCr5, 16MnCr5, 16MnCrS5,17CrNiMO6, 18CrNiMo7, 20MnB4, 23MnB4, 23MnB3, 34CrMo4V, SS410, SS416, SS420, SS431, SCM420, SCM440, 13Ni13Cr3, 15Ni16Cr5, 36Si7, 40Cr4, 15Ni5Cr4Mo1, 15Ni7Cr4Mo2, 16Ni8Cr6Mo2, 36Si7, 37C15, 35Mn6Mo3, 40Ni6Cr4Mo3, 40Ni10Cr3Mo6, 55Si7, 50Cr4V2, 25Cr13Mo6,  10C8S10, 14Cr14S14, 25C12S14, 40C10S18, 11C10S25, 40C15C12,  

SAE 1010, SAE1025, SAE1030, SAE 1035, SAE 1040, SAE 1117, SAE1541H, SAE4130, SAE4135, SAE4140, SAE4145, SAE4145H, SAE 4330, SAE 4340, SAE 4820, SAE5160, SAE8620, SAE 8630, SAE8640, SAE52100, SAE9310, AISI1010, AISI1025, AISI1030, AISI 1035, AISI 1040, AISI 1117, AISI1541H, AISI  4130, AISI4135, AISI4140, AISI4145, AISI4145H, AISI 4330, AISI 4340, AISI4820, AISI 5160, AISI 8620, AISI 8630, AISI 8640, AISI 9310

BS970 080A15, 080M15, 070M20, 080A30, 080M30, 080M40, 080A42, 080A47, 080M50, 070M55, 150M19, 150M36, 045A10, 045M10, 080M15, 210M15, 635M15, 637M17, 655M13, 665M17, 805M17, 805M20, 815M17, 820M17, 822M17, 835M15, 530M40, 605M36, 606M36, 708M40, 709M40, 722M24, 817M40, 826M31, 826M40, 945M38, 410S21, 416S21, 416S29, 420S29, 420S37, 431S29

EN 10088-3  X12Cr13, X20Cr13, X30Cr13, X17CrNi16-2 

ASTM A105, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11,  ASTM A182 F12, ASTM A182 F22, ASTM A182 F91, ASTM A182 F92, ASTM A350 LF2, ASTM B16, ASTM A193 B7, ASTM A193 B16, ASTM A266 Grade 1-2-3 and 4,  ASTM A29 all grades, ASTM A540 B21, ASTM A540 B22, ASTM A540 B23, ASTM A540 B24, ASTM A540 B24V

X22CrMoV121, 21CrMov57, 40CrMoV4-6, 27NiCrMoV15-6, 26 NiCrMo 14-6, 20CrMoVTiB4-10, X19CrMoNbVN11-1, X10CrMoVNb9-1

DIN 1.2714/DB6, DIN1.2343/AISI H11, Din 1.2344/AISI H13

GOST 4543-71 33XC, 38XC, 40XC, 45XH, 30XH3A, 12X2H4A, 20X2H4A, 20X2H4MA, 18X2H4MA, 30XGCA, 40ХН2МА, 40Х2Н2MA, 30ХН2МА